EA113 TFSI- AKS Billet Oil Filter Housing

AKS Billet Oil Filter Housing For EA113 2.0 TFSI - AKSOFHEA113
 
For years now, a major gripe of the EA113 2.0 TFSI engine has been the factory plastic oil filter housing, most recent part number 06F115397K, its rubbish! We must have replaced hundreds of them in our workshop. They go brittle over time and crack causing an oil leak that makes an absolute mess of the car, and the workshop floor. Couple that issue with cars producing far more power than standard, needing additional oil cooling for hard / track usage and you end up with a part that really isn't up to scratch. You have no way to run any oil cooler fittings from the stock filter housing without using a sandwich plate, which is all well and good but you are still left with the stock, substandard part fitted.
 
This is a part we have wanted to address for as long as we have been working on TFSI platform vehicles, and we are very excited to offer this in 2024. Our AKS ultimate oil cooler solution for the TFSI platform, a billet alloy filter housing, with a built in Mocal thermostat and the ability to run an oil cooler directly from the filter housing, no more plastic crap!
 
Unlike a lot of other oil cooler solutions, this kit will still enable you to retain the factory PCV system, if you select the AKS AN to stock breather adapter dropdown you will be able to plumb this straight onto the PCV valve. Or, you can run this housing without the stock PCV system if desired, the choice is yours.  The parts also fit with stock and uprated throttle pipes.

Another bonus, the kit is designed to use a spin on metal style oil filter rather than the stock paper TFSI oil filter, we recommend the earlier VAG 1.8T (BAM, AGU, ETC...) Filter - Genuine part number 06A115561B (x1 filter is included with the housing)
 
The housing is available with a few select options to allow you to purchase just the housing, or the housing with added parts. In the images for this product we will add descriptions so its as easy as possible to work out what you are getting with or without the dropdowns you select.
 
If you order the housing with no dropdown options selected, you will receive...
 
x1 AKS Billet Housing with built in 92 degree Mocal thermostat
x1 Genuine VAG '1.8T' spin on metal oil filter - 06A115561B
x1 Adapter for oil pressure switch
x1 Elring filter housing to engine block gasket
x3 AN10 Fittings
x4 Bolts to secure the housing to the block
A Selection of blanking plugs & washers
 
Using the dropdowns on this listing, you can also add...
- A Water pipe blanking plug
- An AKS AN to stock breather adaptor
- A CVP Oil cooler pre assembled kit, which will include...
x2 AN10 Lines and fittings (premade!)
16 Row Hurricane Motorsport oil cooler
Hurricane Motorsport oil cooler bracket + hardware
There is nothing left for you to buy! complete package!
 
Please note
- If you select the additional Mocal oil cooler , no securing brackets are supplied with this so you will need to make / fabricate something of your own, we have offered the parts this way as no two cars will require the exact same bracket, with different models this kit can be fitted too and different requirements, etc. Please bear this in mind as something extra you will need to factor in.
 
- This part is designed to work with an oil cooler fitted, to fit this part you will either need to have an oil cooler allready instaled, or plan to install one at the same time as this product. The dropdowns in the listing give you the option to purchase an oil cooler with all the fittings and lines, or you can assemble a kit out of parts you source seperately. This housing is not suitable for use without an oil cooler.